Wiring Redarc Tow-Pro Elite Brake Controller on 2012 Toyota Tundra
Question:
Do white and brown wires have to be connected to the body of the car , or just together? Thank you.
asked by: Andrew
Helpful Expert Reply:
It sounds like you are referring to the factory brake controller wiring on your 2012 Tundra and connecting it to the wires on the Redarc Tow-Pro Elite Brake Controller # RED44FR. If this is not the case or you have a different model truck please just let me know.
If you are hardwiring the Redarc Controller to the factory wires the brown wire from your truck is the ground wire, but it should already be grounded via the negative post on the battery. This means that you will simply connect it right to the white wire coming from the brake controller. This will complete the ground circuit.
The rest of the connections to the wiring on the 2012 Toyota Tundra are as follows:
Black with red goes to the brake controller black wire for 12 volt power
Green with white goes to the controller red wire for input from the brake switch
Red goes to the controller blue wire for output to the trailer brakes
The solid green wire is not used by the Tow Pro Elite brake controller
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Trailer Maintenance Schedule
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Arms for Roadmaster EZ5 Base Plate Kit for 2015 Honda Fit
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern