Recommended Trailer Brake Controller and Wiring for 2019 Honda Odyssey
Question:
Hi people. I have a 2019 Honda Odyssey and a trailer with electric brakes what do I need for wiring? What brake controller do you recommend?
asked by: Logan
Expert Reply:
Starting with the brake controller itself I highly recommend the Curt Echo # C51180 for your 2019 Honda Odyssey.
This is a really unique controller that allows for an extremely simple installation that involves simply plugging it into a 7-Way connector on the vehicle and pairing to your smartphone via Bluetooth after downloading the free app. It will provide automatic proportional braking that will activate the brakes on the trailer at the same time and with the same intensity that you apply to them in your Odyssey. Because you use your phone to adjust its settings or activate the manual override, this system eliminates the need for an additional unit that would need to be mounted inside the vehicle like other controllers.
The additional parts you need to install the controller so that it can power the trailer brakes will depend on what, if anything, the van is already equipped with.
If there is not a wiring connector present at all at the rear of the vehicle you will need to start with a 4-Way harness. For this I recommend the Tekonsha T-One # 118781, This custom harness will install by simply plugging into factory ports behind the driver side trim panel. I have attached an installation video to assist.
Then with the 4-Way installed (or if you already have one) you will need to convert it to a 7-Way using the Wiring Kit # ETBC7L. This kit includes everything you need to do this along with the additional wiring and circuit breakers required to install the Curt Echo.
Products Referenced in This Question
T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Curt Echo Full Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Solution for Suspension Sag on 2016 Toyota Highlander Towing Trailer
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?