Lug Nut Torque Recommendation for Dexter Hub # 8-219-4UC3-EZ to 17.5 inch Wheel
Question:
Hi guys, My trailer is equipped with the dexter 8-219-4uc3 Drums identical to the ones sold by etrailer which should accommodate a 17.5 inch wheel. I ordered and received my new lynx wheels from etrailer which I installed upon arrival. They fit and look great ! My problem is that I cannot find anywhere , as to what I should torque the lug nuts at, for that particular wheel,to the 1/2 inch studs on my drum. I mounted them using 1/2 x20 closed chrome studs. I torqued them to 95 ft. lbs for now which I can increase if need be. Please advise, Thank you,
asked by: Andy V
Helpful Expert Reply:
95 ft lbs would be good for torquing the lug nuts of the trailer hub part # 8-219-4UC3-EZ to a 17.5 inch diameter trailer wheel. The acceptable range would be 90 to 120 ft lbs for your setup.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Q&A: Common Torque Specifications for Lug Nut Size
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Shop: Hopkins Trailer Breakaway Kit with Built-In Battery Charger - Side Load
- Shop: Epicord 7-Way Molded Trailer Plug - 8' Long
- Search Results: break away system
- Search Results: waterproof junction box
- Search Results: 3802311
- Search Results: led light bar
- Search Results: breakaway kit
- Search Results: junction box
- Search Results: roof membrane
- Q&A: Will the Replacement Dexter Bolt-On Shock Kit Fit a 2011 Heartland Landmark
- Video: Review of Dexter Replacement Bolt-On Shock Kit - K71-697-00
- Q&A: Shock Kit that fits 2020 Jayco Eagle HT 28.5RSTS with Shock Prep
- Q&A: Best Tonneau Cover For Toolbox For 2023 GMC Sierra 2500
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Correct Shock Absorbers for 2021 Jayco Eagle HT with Shock Prep
- Shop: Brake Controller
- Video: Lippert Ground Control Electric Leveling System Installation - 2015 Forest River Vengeance TT Toy Ha
- Q&A: Lug Nuts Shearing off Hub and Drum of 7,000 lb Dexter Axle
- Video: Lippert Equa-Flex Cushioned Equalizers Review and Installation
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation
- Video: Lippert Equa-Flex Cushioned Equalizers Installation - 2005 K-Z New Vision
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Video: Dexter E-Z Flex Suspension Kit Review and Installation
- Shop: Suspension Enhancement