Best Towing Mirrors for 2018 Toyota Tundra

Question

Question:

I am looking for the best towing mirrors for my 2018 toyota tundra. what do you have?

asked by: Sam R

0

Expert Reply:

The best towing mirrors for your 2018 Toyota Tundra are the K-Source Custom Extendable Towing Mirrors # KS70103-04T because they simply replace the factory mirrors on your truck while allowing you to keep the turn signals, powered adjustment and heated glass features that are on your OEM mirrors (keep in mind these features will only be available if your current mirrors already have them).

The K-Source Custom Extendable Towing Mirrors # KS70103-04T are telescoping so you will be able to pull them away from your Tundra when you are towing your trailer and push them back to their normal position when you are not towing.

I have added a photo from one of our customers who put these mirrors on their Tundra so you can see how the mirrors look when in different positions. I have also added a link to a video review of these mirrors for you to check out.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, the K-Source Snap & Zap Custom Towing Mirrors #KS81300 are confirmed to fit over the factory mirrors of your 2018 Toyota Tundra SR5 Crew Max as well as the Limited and Platinum models. I confirmed this with my contact at K-Source.…

view full answer...

Answer 2

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 3

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Best Towing Mirrors for 2018 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching