Ground Clearance of Curt Hitch When Installed on 2015 Mini Countryman

Question

Question:

After the CURT hitch is installed, what is the clearance between the ground and the lowest part of the hitch assembly?

asked by: Rob S

0

Expert Reply:

When we installed the Curt hitch part # C11333 on a 2013 Mini Countryman similar to your 2015 model we found that from the top of the hitch opening to the ground measured 10 inches. That would mean from the bottom of the hitch to the ground would measure 8-1/2 inches.

expert reply by: Jameson C

0

Answer 1

The Curt Trailer Hitch Receiver part #C11333 is a fit for all models of a 2016 Mini Countryman excluding John Cooper Works Editions. It does require trimming of the underside of the rear bumper fascia, but this is plastic. This hitch is rated as…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2", part #306-X7601, is 2-1/2" from the face of the hitch receiver to the center of the hitch pin hole. It has a depth from the center of the hitch pin hole to…

view full answer...

Answer 3

Depending on exactly how you're wanting to mount the bikes to your vehicle, you have a couple of options. Racks either attach to a trailer hitch receiver below the bumper or attach via straps and rest on the bumper with a trunk-mounted…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C11333 is indeed a fit for a 2016 Mini Countryman S ALL4 and has a 2,000 lb weight capacity.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Ground Clearance of Curt Hitch When Installed on 2015 Mini Countryman

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching