How to Identify the Transmission Cooler Oil Return Line On a 2008 Jeep Wrangler
Question:
Which line out of the trans is the cooler return line? I purchased a trans cooler part #13503. Thanks
asked by: Dave W
Expert Reply:
The best way to determine which line on a transmission cooler is the return line from the radiator is to use the following procedure:
1. Start engine while engine is cold
2. Place transmission shift lever in drive for no more than 10 seconds.
3. Stop engine and remove keys
4. Identify the oil return line by feeling both oil lines. The coolest line is the oil return line.
On an aftermarket transmission cooler like the Derale cooler, part # D13503, the ports are not input specific or output specific. It is not directional so you can choose either port for either function. You will want to choose the inlet or outlet port location by what will make your installation easier.
I am including a link to a FAQ page on transmission coolers.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Shop: Transmission Cooler
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Shop: Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient
- Video: Transmission Cooler Installation - 2017 GMC Canyon
- Shop: Derale Universal Bendable Metal Mount Kit
- Shop: Derale Radiator Adapter Fittings for GM
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 25580
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Video: Choosing the Right Trailer Wiring
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: trailer jack
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Video: Derale Series 8000 Transmission Cooler Review
- Q&A: How Much Upward Bend Should Trailer Axle Have
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 44643
- Search Results: gooseneck coupler
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: Suspension Enhancement
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer