Recommended Boat Cover For 16 Foot Lund Rebel SS Boat and 40 HP Outboard Motor
Question:
Have a 16 ft Lund Rebel SS with a 40 hp outboard - do you have a cover that fits the boat and motor - can it be used outdoors in winter or should another top be set up above it
asked by: Craig
Expert Reply:
You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width is over 90 inches, you may need the # 052963889383 cover. These covers can be used in winter weather and you will not need another cover on top of the StormPro Covers.
A step up from the StormPro cover is the DryGuard cover which is a water-proof cover. Checkout the Classic Accessories DryGuard Waterproof Boat Cover, part # CA20084, which will fit 14 to 16 foot long boats with a beam width of up to 90 inches. Again, you will want to measure the beam width of your boat.
The cover you selected, Classic Accessories Hurricane Canvas Boat Cover, part # 052963840384, would be better for an inside storage facility.
I have linked instructions for the Classic Accessories Hurricane Outboard Motor Cover, part # CA20011.
Products Referenced in This Question
Classic Accessories Boat Cover by StormPro - 14' - 16' (beam width 90")
- Boat Covers
- V-Hull Boat Cover
- Vented
- 90 Inch Beam Width
- 14 Foot Boats
- 15 Foot Boats
- 16 Foot Boats
- Gray
- Classic Accessories
more information >
Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98")
- Boat Covers
- V-Hull Boat Cover
- Vented
- 98 Inch Beam Width
- 16 Foot Boats
- 17 Foot Boats
- 18 Foot Boats
- Gray
- Classic Accessories
more information >
Product Page this Question was Asked From
Classic Accessories Boat Cover by StormPro - 14' - 16' (beam width 90")
- Boat Covers
- V-Hull Boat Cover
- Vented
- 90 Inch Beam Width
- 14 Foot Boats
- 15 Foot Boats
- 16 Foot Boats
- Gray
- Classic Accessories
more information >
Continue Researching
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Search Results: glide
- Search Results: winch stand
- Q&A: Boat Cover Recommendation for a Crestliner Tri Hull 17 Feet Long
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Trailer Tire Sizing
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Video: Choosing the Right Trailer Wiring
- Search Results: fender
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Brake Controller
- Search Results: safety chains
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Article: Most Popular Wheel Bearings
- Shop: Gooseneck Hitch
- Shop: Grease Seals 10-36 (pair)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: leaf spring