Availability of Bearings, Seals, and Cap For 2002 Trailstar Trailer
Question:
I have a 2002 trailstar trailer as part of a 15 foot tracker boat package. I am looking for a supplier of bearings, seals, o-rings, and the rubber bearing cap for the through the hub lubrication. This trailer does not have breaks.
asked by: Mark
Expert Reply:
The best way to determine the correct parts for your 2002 Trailstar trailer is to disassemble a hub on one side of the trailer and get the bearing part numbers that are stamped on the bearings. There is an inner and outer bearing. With these part numbers I will be able to determine the bearings, seals, and other parts you might need for your trailer.
I looked up the Trailstar trailers and it looks like they use the EZ Lube hubs. The EZ Lube system will have a zerk fitting on the end of the spindle. When the hub is installed on the EZ lube spindle it will form a cavity around the wheel bearings and when you pump grease into the spindle through the zerk fitting it will fill the cavity with grease and allow the bearings to be greased and will keep water from getting to the bearings.
I am including a link to a FAQ page and a video link on removing the bearings and seals on a trailer hub.
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Q&A: How to Find the Correct Grease Seals for a 2002 Trailstar Boat Trailer
- Q&A: Dimensions of Dexter Grease Seal # 010-180-00
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Grease Seal
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: How to Pick Out Hub/Drums for 2015 22 foot Coachman APEX 215 RBK-1SL
- Q&A: Replacement Hub, Bearings, Races, and Seals for Trailer Hub with H-1377 Bearing
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Replacement Spindle and Hub/Drum for Trailstar with 3500 lb Axle
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Article: Most Popular Wheel Bearings
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Lippert Solera Slider Slide-Topper Review
- Shop: Brake Controller
- Shop: Gooseneck Hitch
Michael H.
6/28/2020
I have a 2002 trailstar trailer as part of a boat package that has a model number por200sp. It has the same zerk fittings. I am needing to replace one of the axles and would like to know a proper substitute.