Inner Dimensions of the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles # TLS9500

Question

Question:

I see they are 1/4 inch diameter pins. In the locked form ,what is the space between locking apparatus ? I have happijac turnbuckles and am interested in purchasing locks. they also have 1/4 inch hole. the width is 1 1/8 inch Thanks.

asked by: Garry F

1

Helpful Expert Reply:

I went out to the warehouse and measured the single unit # TL11001 of the Pin Locks # TLS9500 that you referenced and found the width to be 1-7/16" but to the rubber grommet measured 1-1/4". If you need 1-1/8" of space then these will work for your application.

expert reply by: Jon G

1

click to enlarge

Answer 1

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

view full answer...

Answer 2

We have 2 different 2-1/2" hitch receiver options for your 2024 Ram 5500 Cab and Chassis and the correct one just depends on what you're looking to get out of the hitch. The Curt #C15800 is your classic hitch receiver while the TorkLift…

view full answer...

Answer 3

That's a good question, as finding the exact right spot for the main unit of any flat tow braking systems can be perplexing, but for your 2024 Chevy Equinox, there's actually a perfect spot for the unit of the Demco Stay-IN-Play DUO…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Since the bracket is going to sit lower you'll want to measure from the bracket of the #LC184089 up to the mounting point on the camper to determine the exact size needed. For example, the front turnbuckles of the HappiJac Original Turnbuckles…

view full answer...

Answer 6

Yes we have the solution for you. TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" part #TLD1111-30 is a confirmed fit for your 2019 Ram 3500 dual rear wheel as long as it has the factory hitch. This…

view full answer...

Answer 7

The SuperSprings SuperSway Stops part #SS65GR for a 2022 GMC Sierra 3500 will only engage when loaded, they basically just extend the upper overload a few inches so they come into contact sooner offering faster support. They feature a simple bolt-on…

view full answer...

Answer 8

The HappiJac Qwik-Load Turnbuckles #LC182895 have lengths which are designed to work with their bed/bumper mounting points. For TorkLift frame mounted tie downs I recommend using their FastGun Turnbuckles #TLS9529-2-LK as they are all long enough to…

view full answer...

Answer 9

Unfortunately no, the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles #TLS9500 will all use the same key, however the TorkLift Tie Down Locks #TLS9700 will use a different set of keys as they are not able to be keyed alike.

view full answer...

Answer 10

I may have a solution for you, but according to my contact over at TorkLift the only way to determine what locks you've got on there would be by the number that is on the keys; in this case if you can't locate a key it looks like you're…

view full answer...

Answer 11

Yes, you could leave the Trailer Coupler Lock #e98886 installed on a trailer coupler while the vehicle is towing. This will keep the coupler locked to the truck's hitch ball while towing and then if you were to park the truck as well. This is a…

view full answer...

Answer 12

I spoke with my contact at Air Lift about kit #AL57295 on your 2014 Ram 3500. He stated that what you are experiencing is normal. What I recommend is getting the truck loaded up and the trailer coupled and then adding however much air is needed to…

view full answer...

Inner Dimensions of the Pin Locks for TorkLift FastGun and Derringer Turnbuckle Handles # TLS9500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching