3,500 lb Trailer Hub/Drum with 5 on 4-3/4 inch Bolt Pattern
Question:
I am building a trailer with 3500lb axle. I know that Etrailer sells pt#845475UC1. I didnt see or I missed it. Looking for a drum so I can put brakes on my axle. The axle will be a Dexter or Libert. The local stores are less than helpful. Trying to match my trailer and tow vehicle. Tires and wheel set up. Trailer drums and brakes 5x4.75
asked by: Dave
Expert Reply:
For a hub/drum with a 3,500 lb capacity and the bolt pattern of 5 on 4-3/4 inch like you said you need you'd want the Dexter part # 845476UC3 which would fit and work well. The drum size is 10 inch and for assemblies you'd want the # 23-468-469 for self-adjusting assemblies for both sides of the trailer.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Dexter 8-248 Hub, Races, Bearings and Grease Seals For Boat Trailer
- Q&A: Can 4.80-12 Tire be Replaced with ST145/R12 Tire Using the Same Wheel
- Article: Most Popular Wheel Bearings
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Troubleshooting Husky Brute Trailer Jack With Remote that Retracts Without Remote
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Printable Trailer Bolt Hole Pattern Template