Difference Between Curt Hitches # C11389, # C113891, and # C113893 for 2015 Lexus IS 250

Question

Question:

what are the differences between 11389, 113891, and 113893 my car is Lexus IS 250 year 2015

asked by: Nicole

0

Expert Reply:

The Curt hitch # C11389, # C113891, and # C113893 are all fits for your 2015 Lexus IS 250. The difference is what comes which each part number. They all come with the hitch, but part # C113891 comes with a Euro style ball mount and the # C113893 comes with a standard style ball mount.

expert reply by: Jameson C

0

Answer 1

Your picture seems to show that the Curt trailer hitch #C11389 is installed correctly on your 2015 Lexus IS 350. Based on the design of the vehicle there isn't a way to make the hitch much higher without making some modifications to the vehicle.…

view full answer...

Answer 2

The correct hitch for your 2015 Lexus IS 250 would be the Curt Hitch part #C11389 that you referenced. For a ball mount you would want the part #C45521, 1-7/8 inch ball #19256, 2 inch ball #19258.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 11

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Difference Between Curt Hitches # C11389, # C113891, and # C113893 for 2015 Lexus IS 250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching