Dimensions of U-Bolt Kit for Mounting 5,200-lb to 7,000-lb # APUBR
Question:
Can you tell me the distance between holes on the backing plates? Obviously the distance between one set of holes is 3”. What is the distance between the other set of holes? Basically, what width of leaf spring are these made to fit over?
asked by: Dan
Expert Reply:
The U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/4" Long U-Bolts # APUBR-9 you asked about has overall bracket dimensions of 5-1/4 by 3-3/4 inches. The center on center hole measurements are 3-3/4 inches for your u-bolts and 2-5/8 inches between them for your leaf springs.
Most double eye leaf springs will be 1-3/4 inch wide like # e64SR where slipper springs can be 2 inch like # e74SR and still work with this kit. Wider slipper springs like the 2-1/2 or 3 inch will not work with this kit.
Products Referenced in This Question
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Painted
- etrailer
more information >
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Leaf Spring for 2021 Grand Design Imagine 3250BH
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Replacement U-Clamp and Split Bushing For Roadmaster Front Sway Bar 1209-100
- Q&A: Replacement Leaf Spring Solution for 2021 Grand Design Solitude
- Q&A: How to Determine Correct Replacement Leaf Springs for 7,000 lb Axle
- Q&A: Replacement Leaf Spring for 7,000 Pound Lippert Axle
- Q&A: Length Of The U-Bolts In The Replacement U-Bolt Axle Mounting Hardware Kit # LC27XV
- Q&A: 2" Hitch Ball For Use On Shocker Hitch HD Air Ball Mount # SHK22VR For 7-1/2" Drop