Replacement 12V Fan Motor/Blade Assembly for Fantastic Vent Series 7300

Question

Question:

I have a sticker on my fantastic fan that says model 7300.inch I cant find this online anywhere, closest is 7350. Anyway, this looks like it would fit mine, will it? Is there any way to know for sure, or just have to wing it?

asked by: Christopher G

1

Helpful Expert Reply:

The correct replacement 12V fan motor assembly for your Fantastic Vent 7300 series vent is indeed the part # FVK8017-00, according to my contact at Dometic/Fantastic Vent. You can double check by comparing your existing fan motor to the photo I linked for you which includes key dimensions.

expert reply by: Adam R

1

click to enlarge

Answer 1

If I understand what you are looking for correctly, then you have a 8000 series Fan-Tastic fan and are looking for the replacement fan motor kit. If that is correct, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans…

view full answer...

Answer 2

I spoke with my contact at Fan-Tastic Vents and she verified that the part #FVK8017-00 is a replacement for your 4000 can style motor. She said they actually have this listed as a fit in their system so you are good to go!

view full answer...

Answer 3

It would be time to replace the motor of your Fan-Tastic roof vent LF8000 and for that you'd want the part #FVK8017-00.

view full answer...

Answer 4

I see what you mean by "bow tie" motor mount as the brackets that hold the motor do resemble that. I wish we had just the mounts available but at this time best solution we can offer would be an all new motor with part #FVK8017-00.

view full answer...

Answer 5

Thanks for the picture of your roof vent. From that I can tell that the motor part #FVK8017-00 that you referenced is the correct replacement.

view full answer...

Answer 6

Thanks for the picture! Yes, the Fan-Tastic Replacement Fan Motor Assembly Kit item #FVK8017-00 is the correct part for your Create-a-Breeze model 8000 vent. I confirmed this information with Fan-Tastic vent it is the best replacement.

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Replacement 12V Fan Motor/Blade Assembly for Fantastic Vent Series 7300

Product Page this Question was Asked From

Continue Researching