How to Pick Out Hub Replacement for EZ Loader Boat Trailer
Question:
1996 ez loader boat trailer 15 gw Which kit do I need
asked by: Bryant
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need to know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: bearing buddy 1980
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Article: How to Measure a Trailer Axle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30670 Review
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Bearing Buddy Bearing Protectors - Model 1980 - Chrome Plated (Pair)
- Search Results: btr spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Q&A: How to Determine the Correct Replacement Hubs for a 1994 Bayliner Capri
- Search Results: short hub
- Q&A: Boat Trailer Hub Recommendation with L44649 Bearings and 5 on 4-1/2" Bolt Pattern
- Search Results: grease seal 125 id
- Search Results: rod holder
- Search Results: 2k axle
- Q&A: Recommended Galvanized 2K Idler Hub with 5 on 4-1/2" Bolt Pattern
- Q&A: Recommended Axle Replacement for 40.5 x 48 Inch Harbor Freight Trailer
- Search Results: l44649
- Q&A: Replacement 5 On 4-1/2 Bolt Pattern Boat Trailer Hub for 1 Inch Spindle
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Video: Optronics LED Combination Tail Light Kit Installation
- Video: Optronics ONE LED Trailer Tail Light Installation
- Video: Review of TecNiq Boat Lights - Surface Mount 360 Degree LED Boat Navigation Light - TN65ZR