Parts Needed to Flat Tow 2014 Honda CR-V
Question:
How much does that all cost? And would be the labor to install it. Thanks
asked by: Philip V
Expert Reply:
Sounds like you are referring to flat tow products for a 2014 Honda CR-V which first starts with a base plate kit.
For that you would want the Blue Ox Base Plate kit part # BX2258. I attached an install video for you to check out as well.
The Blue Ox Alpha # BX7380 is the most popular tow bar we offer that has been confirmed to work with the base plate kit so it should work very well. It also comes with safety cables.
For trailer wiring you would want the Hopkins Kit part # HM56304 and the # RM-164-7. This will plug in line with your vehicle taillights and won't require any cutting, splicing, or drilling. To convert your 7-way to a 4-way you would also need part # A7WCB.
You will need a fuse bypass to make pulling the needed fuse easier when flat towing. For that you would want the # RM76512.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You will also need the 12 volt outlet kit part # RM-9332.
The prices are all available down below on the product links. Labor to install would really be somewhat intensive for the base plate and wiring. It's hard to give an exact quote but it would take a shop probably a little less than a day to install everything.
Products Referenced in This Question
7-Way Round RV Style Trailer Connector - Trailer Side
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 7 Round - Blade
- Optronics
more information >
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6500 lbs
- Fits Blue Ox Base Plates
- Blue Ox
more information >
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Tow Bar Wiring
- Plugs into Vehicle Wiring
- Wiring Harness
- Custom
- Tail Light Mount
- Hopkins
more information >
RoadMaster 7-Wire to 4-Wire Flexo-Coil Kit
- Accessories and Parts
- Tow Bar Wiring
- Adapters
- 7 Round - Blade to 6 Round
- Coiled Cord
- Roadmaster
more information >
Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicle - (2) 20-Amp ATM Mini-Fuses
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Fuse Bypass
- Custom
- Mini Fuse
- Engine Compartment
- Roadmaster
more information >
Product Page this Question was Asked From
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Q&A: Will The Blue Ox Baseplate # BX1139 Fit A 2024 Jeep Wrangler Rubicon X With A Steel Bumper
- Q&A: Height of Bulldog and the Powered-Drive Trailer Jack, # BD500187, from Bracket to Top of Jack
- Q&A: Grade of U-Bolt in the U-Bolt Kit APUBR-1
- Q&A: Where is Fuse that Needs to be Removed to Flat Tow 2014 Honda CR-V
- Article: How Many Batteries Do You Need to Run RV Air Conditioner?
- Q&A: Replacement Electric Tongue Jack that Will Allow Full Opening of Tailgate on Tow Vehicle
- Q&A: Replacement Strut for Stabilus Lift-O-Mat on Dometic Awning
- Q&A: Dimensions on Roadmaster Replacement Bracket U Clamp
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: How to Choose a High-Low Adapter
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing