Replacement Hub Assemblies for 2004 Tracker Trailstar Trailer
Question:
Looking for the number of the hub assembly kit for a 2004 Tracker Trailstar. Wheel Bearing number is SKFL44649+L44610 Wheel Bearing Seal SKF14832 NAT. 45255 4N Tires 530X12 5 Lug Rim
asked by: Dan
Expert Reply:
If your hub uses the # L44649 bearing (1.063 inch inner diameter) for both the inner and outer bearings, and your Tracker Trailer is equipped with 2,000 pound axles, the correct hub and drum assembly should be the Dexter # 8-257-5UC3-EZ. For an idler assembly you can use part # 8-258-5UC1-EZ. These feature the 5 on 4-1/2 inch bolt pattern that you mentioned as well.
I was not able to cross reference the seal number that you provided, so you will just want to make sure that your existing seal has the same 1.50 inch inner diameter as the grease seal for these hubs.
I have attached a couple short video demonstrations for these hub assemblies that you can also check out.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Do Trailer Wheel/Tire Setups Need to be Balanced
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Timken Replacement Trailer Wheel Bearing - L44649
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Video: Dexter Trailer Idler Axle with Idler Hubs Installation 20440I-EZ-60
- Video: Redline Tires and Wheels RG03-080 Review
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: Most Popular Wheel Bearings
- Search Results: boat trailer wheel hub kit
- Search Results: guide ons
- Q&A: How to Pick out Replacement Bearings for Tracker Boat Trailer
- Search Results: hub dust caps
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Video: Standard Axle Idler Hub Installation FAQ
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Video: Redline Trailer Spindles RG05-100 Review
- Video: CE Smith Boat Trailer Post-Style Guide-Ons Review CE27626