Does RLCP Leg Adapters # RRVA-FK2 Fit Aero Shaped Crossbars

Question

Question:

Will the RRVA-FK2 adapters fit my rlcp 12 leg towers and vortex aero bars?

asked by: Mario C

0

Expert Reply:

Yes, the RLCP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK2 that you referenced was specifically designed to fit Rhino Rack RLCP legs and Vortex Aero bars like you mentioned having so it would work well for you.

expert reply by: Jameson C

0

Answer 1

One thing that may cause confusion is determining whether your Jeep has a hard Top or a soft top. If it has rain gutters, then technically, your 2021 Jeep Wrangler Rubicon has a hard top with a Sky One Touch Power Soft Top. The following…

view full answer...

Answer 2

Yes, we have something for this, I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" #RB1500, and the 8" Tall Gutter Feet, #RL210S2 or event the #RL280S4-2. These roof-rack legs are designed to mount on your vehicle's…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

There is a Titan hitch extender that should work for you, but would require a Titan hitch be installed on your truck to handle a tongue weight loaded that far from the hitch. It is Reese part #RP45292. You can use it as a 34 inch extension or cut it…

view full answer...

Answer 8

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...

Answer 9

The Reese Titan Extension/Reducer you referenced, part #RP45292 would work great with the 2-1/2 inch Class V hitch on your Ram. As you mentioned, the extension has a 8K capacity when cut down to the 24 inch length, that will provide a 2 inch receiver…

view full answer...

Answer 10

We have a full replacement for your light. The Command Electronics #CE86FR. Take a look at the attached video to see them in action.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Does RLCP Leg Adapters # RRVA-FK2 Fit Aero Shaped Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching