Trailer Hitch, Wiring and Ball Mount Recommendation for 2015 Honda Fit
Question:
Hi, I called U haul and they were going to install a 3500 lb rated Class 2 hitch on my car. Their quote was $371 with wiring, and $226 without. But you show a class 1 hitch at 2000 lbs. I am confused. Also, I currently have leftover from my previous car a Class 2 Bikerack with a hitch ball to connect to a canoe trailer. Do you have something lighter as it is a heavy beast that would work for my 2015 Honda Fit.
asked by: Barny W
Expert Reply:
For smaller, lighter-duty vehicles like your 2015 Honda Fit we only have Class I hitches like the Draw Tite part # 24920 that you referenced. I can't imagine a Class II hitch being available or useful for your vehicle as it wouldn't be able to tow 3,500 lbs regardless of what hitch is on it.
We have trailer wiring as part # 118767 which would be a fantastic option confirmed as a fit. For a ball mount you'd then want the part # 36071 which is designed for this hitch and then for hitch balls part number # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which is Better Curt or Draw Tite Hitch for 2017 Honda Fit
- Q&A: Can I Put A Roof Tent On A 2020 Toyota Corolla Hatchback With A Naked Roof?
- Q&A: Can You Use Other Battery for Curt T-Connector Vehicle Wiring Harness On 2018 Ram ProMaster 2500
- Q&A: Adding Cargo to a 2015 Honda Fit
- Q&A: Does Draw Tite Hitch 24920 Fit 2015 Honda Fit and Who Could Install It
- Q&A: Curt or Draw-Tite Trailer Hitch For 2020 Honda Fit
- Article: How to Install a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Article: How to Measure for Trailer Hitch Drop