Recommended Grease Conversion for Dexter 12k Oil Bath Axles
Question:
Is it possible to change my lubricatant in my oil bath axles from oil to grease? What do you think is better if I can change it? Leave it oil or change to grease? Thank you in advance.Dexter 12k oil bath axles
asked by: Tyler
Helpful Expert Reply:
The Dexter 12K oil bath axles can be changed over to grease without any issues. The oil does keep the bearings lubricated well, but there is a much higher risk of leaking which leads to a much higher risk of failure. I'd personally move to grease # L11390 and make sure it is packed well into the bearings using # PTW1218. This will allow you to use your same bearings and oil cap, but you will need to replace the seal once removed to pack the inner bearing. For that you can use # 10-56.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 3.125 Inch I.D.
- 4.500 Inch O.D.
- Redline
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Shop: Oil Seal
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Q&A: How to Convert Oil Bath Hub to Grease - 10k Dexter Axles on BigTex 22GN
- Search Results: 12k dexter axle
- Search Results: 12k dexter
- Shop: Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 8,000 lbs
- Shop: Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
- Search Results: light bracket
- Shop: Vehicle Tow Bar Brake System
- Video: Optronics Trailer Lights - Clearance Lights - MCL50AB Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL59AB Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Q&A: Recommended Trailer Brake Kit For Gatormade Aardvark With 8k Dexter Axles
- Video: Performance Tool Plastic Bearing Packer Review
- Search Results: rubber mud flaps
- Shop: Mud Flaps
- Video: Redline Trailer Bearings Races Seals Caps - Caps - RG04-270 Review
- Search Results: bearing and seal kits
- Q&A: What Is The Correct Oil To Use In My Dexter Axles With Oil Lube Bath Hubs?
- Search Results: oil bath
- Q&A: How to Identify Capacity of Dexter Axle by Measuring it
- Search Results: 23~439
- Q&A: Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: Replacement 12-1/4" X 2-1/2" Electric Brakes For a Dexter 8,000LB Trailer Axle
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub - 8-214-8UC1
- Video: Review of Dexter Trailer Brakes - Electric Drum Brake Assemblies - DX32QR
Craig W.
4/3/2020
I have a 2019 gooseneck trailer with tandem single wheel Dexter axles with oil bath hubs. All are leaking, and one loses all of its oil withing 4 hours on the road. I would like to convert them to grease. What parts do I need?