Replacement Nylatron Bushing for Roadmaster All Terrain Tow Bar

Question

Question:

I have a all terrain ser#008944 the shank bushing is bad does that bushing come with kit #rm910003-85 ? and or can it be replaced ?

asked by: Larry P

0

Expert Reply:

The shank bushing you are looking for is the part # RM-200029-70. This is the bushing that prevents friction and binding between the inner and outer arm on your tow bar.

expert reply by: Jameson C

0

Answer 1

It sounds like you need to give your BlackHawk 2 All Terrain Tow Bar #RM-422 a good cleaning. I reached out to my contact at Roadmaster who said that you want to extend that inner arm out all the way and then apply a liberal amount of dish soap that…

view full answer...

Answer 2

I spoke to my contact at Roadmaster and they informed me that the issue you are having is more than likely a worn out bushing. The inner arms are made of stainless steel so rust would not be the issue. In order to get the tow bar back up to speed you…

view full answer...

Answer 3

The part #910021-65 is the correct item for a replacement inner arm on your Roadmaster BlackHawk 2 All Terrain Tow Bar #RM-422. I suggest also replacing the bushing #RM-200029-70 since this serves to prevent friction and binding between the inner and…

view full answer...

Answer 4

We do have replacement bushings for the Roadmaster Falcon All Terrain Tow Bar #RM-522. These are listed as part #RM-200029-70 on our site and come in a quantity of 1.

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Replacement Nylatron Bushing for Roadmaster All Terrain Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching