Replacement for UFP HD1377 Trailer Hub/Drum
Question:
Hi, Youve suggested an alternative for this hub and drum to another customer, but the original UFP hub has a hole on the face of the drum. Is this hole for access or to aid with water drainage since this is for a boat trailer? Thank you.
asked by: Andy
Expert Reply:
From my research, the correct replacement for the UFP HD1377 hub/drum is the Trailer Hub and Drum Assembly part # AKHD-545-35-K or the Dexter 5 on 4-1/2 Complete Hub-and-Drum Assembly part # 84546UC3. These hub/drums both use a L68149 (1.378" inner diameter) inner bearing and a L44649 (1.063" inner diameter) outer bearing.
The access hole you're referring to is more than likely used to monitor pad wear as it would not be for a drain. It could also help to dissipate the heat build up inside the drum.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement 10" Brakes and Hub/Drum Assemblies for UFP HD-1377 Kit
- Q&A: Trailer Hub/Drum to Replace Damaged UFP HD-1377-10
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Right Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - Free Backing - 10" - Right Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - Free Backing - 10" - Left Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Left Hand - 3,500 lbs
- Shop: Hydraulic Trailer Brake - Uni-Servo - Dacromet - 10" - Right Hand - 3,500 lbs
- Q&A: Replacement Bearings, Races and Grease Seal For a UFP HD-1377-10 Trailer Hub
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Brake Controller
- Search Results: bearing buddy
- Shop: Gooseneck Hitch
- Search Results: 25520
- Search Results: 68149
- Search Results: 10~19
- Search Results: 480/400~8 trailer tires and wheels
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: How Many Assemblies Come with Dexter Electric Trailer Brake Kit 23-26-27
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)