Troubleshooting Reese Dual Cam Sway Control that Wants to Ride Up on Cam Flange

Question:

What causes the spring bar to ride up off the cam surface of the cam arm and onto the cam flange?

asked by: Kenneth H

Helpful Expert Reply:

Are both the spring bars of your Dual Cam setup riding up onto the flange of the cam? Reese would recommend that you check the location of the bracket that attaches to the trailer frame. I attached a picture of that.

With the truck and trailer perfectly straight check to make sure that the cam is fully seated into the indent of the spring bar end. If not use the adjustment nuts to get them where they need to be.

expert reply by: Jameson C