Solution for Towing 5th Wheel Trailer with Curt Double Lock Gooseneck Hitch

Question

Question:

I currently have a curt double lock gooseneck and Anderson system we use to pull our fifth wheel . I dont like the Anderson system and would to replace it with the BandW Companion gooseneck to fifth wheel hitch. My question can this system be adapted to my curt double lock gooseneck hitch? Thx

asked by: Tom A

0

Expert Reply:

I do have a solution for a more secure setup to tow a fifth-wheel trailer, however the B&W Companion # BWRVK3500 that you referenced is not compatible with your Curt Double Lock Gooseneck Hitch. The Companion is designed specifically for the square ball hole that the B&W Turnoverball Gooseneck Hitches provide and cannot be adapted to fit your Curt system.

I instead recommend using the Curt X5 Base Rails Adapter # C16210. This is designed to fit your Curt Double Lock Gooseneck Hitch and will provide you with industry-standard base rails that will work with almost any standard fifth-wheel hitch.

If you like the B&W brand, a great option is the B&W Patriot 5th Wheel Trailer Hitch # BWRVK3255 if you have a long bed truck. This will work perfectly with the Curt adapter to give you a 18,000 pound fifth-wheel hitch for towing your trailer. It features 3/4 inch thick dual jaws for excellent contact with the king pin and a fully articulating head for simple hookup.

I have attached a short video demonstration on this hitch that you can also check out.

expert reply by: Chris R

0

Answer 1

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 2

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Solution for Towing 5th Wheel Trailer with Curt Double Lock Gooseneck Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching