How to Test the Hopkins Engager Trailer BreakAway Kit
Question:
hook up break away box now i cant get the light to work trailer pv1004 kauf 2004 ot
asked by: darryl
Expert Reply:
On the Hopkins Trailer Breakaway Kit, part # 20099, when you push the test button the green LED will light if the battery is over 12 volts. If the battery is less than 12 volts the red LED will light illuminate.
I would also recommend to check the wiring of your breakaway kit. I am including a link to a video of the breakaway kit being installed.
1 - Connect one black wire from the breakaway switch to the blue electric brake wire coming from the trailer side connector.
2 - Connect other black wire from the breakaway switch to the positive battery terminal in breakaway box.
3 - Connect yellow wire on breakaway box to trailer 12 volt auxiliary lead.
4 - Connect white wire of the breakaway switch to the white ground wire coming from the trailer side connector.
Also, check to make sure the 12 volt auxiliary power wire and the electric brake controller wire on your 7-Way tow vehicle connector are connected and working. I am including a link to a FAQ page on trailer wiring that will show you which wires to check on your 7-Way.
Product Page this Question was Asked From
Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger - Side Load - 7" Wire
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Should The Breakaway Switch Be Wired Through a Circuit Breaker On Travel Trailer Battery?
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Wiring Diagrams
- Search Results: break away switch
- Search Results: break away switch
- Q&A: Dimensions for Buyers Product Wiring Junction Box # 3375601101
- Q&A: What is the Difference Between Self-Adjust and Nev-R-Adjust
- Shop: Pollak 7-Circuit-Breaker Junction Box
- Shop: Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Q&A: Troubleshooting Weak Trailer Brakes When 2023 Ram 3500 Brake Controller is at Full Power
- Video: Review of Dexter Axle Trailer Axle Parts - Wiring Grommet - 046-124-00
- Q&A: What Size Ring Terminals Should be Used with Buyers Products Junction Box # 3375601101
- Q&A: How to Waterproof Trailer Light Connectors on a Nitro Boat Trailer
- Video: Buyers Products 7 Color Coded Terminal Trailer Wiring Junction Box Review
- Video: Buyers Products Wiring 3375601101 Review
- Search Results: trailer wiring kit
- Search Results: 100 watt solar panel
- Search Results: 45018
- Search Results: wvsxc150
- Search Results: air lift remote
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20400 Review
- Article: Troubleshooting Brake Controller Installations
- Video: Hopkins Trailer Breakaway Kit Review