Weight Capacity of the CE Smith Winch Stand Part # CE31013G
Question:
The tongue width on my trailer is actually 2.5inch 2.5inch wide and 3.5inch high. I dont not know how much play there is in the width of winch stands. Which winch stands would you recommend to accomodate this tongue and would have a capacity sufficient for a 2000 lb wooden boat? Thanks
asked by: Mike
Expert Reply:
In order to attach the CE Smith Winch Stand part # CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer tongue.
I spoke to my contact at CE Smith and they stated that this winch stand has a weight capacity of 1,000 lbs however, this does not mean that the weight of the boat cannot exceed 1,000 lbs as the boat will be considered a rolling load and the pull strength needed to pull the boat up and onto the trailer would also be reduced if you have bunk boards. Therefore, it should work for you in regards to weight capacity.
Although the winch stand will require slight modifications, it will be the best option for you as we do not have any others like it at this time.
Product Page this Question was Asked From
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Boat Trailer Parts
- Winch Stand
- 30 Inch Tall
- 2 Inch Wide
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10100A40
- Search Results: ce smith
- Search Results: ce smith bracket
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Q&A: How Does the CE Smith Winch Stand # CE31013G Mount to Trailer
- Q&A: Size of Mounting Holes on Base of CE Smith Galvanized Winch Stand CE31013G
- Q&A: Are Additional Parts Needed for CE Smith Winch Stand
- Q&A: Dimensions of Bolt Holes on CE Smith Bow Roller Bracket for Winch Stands # CE31005PG
- Q&A: Recommended Winch Post/Stand For Boat Trailer With Roller Stop
- Shop: CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
- Shop: Bow Roller Assembly w/ Bells for 3" Wide Bracket - TPR - 1/2" Shaft - Blue
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Shop: CE Smith Bow Roller for Boat Trailers - PVC - 3" Long - 1/2" Shaft - Amber
- Shop: Yates Bow Roller for Boat Trailers - TPR - 4" Long - 1/2" Shaft - Blue
- Video: CE Smith Boat Trailer Parts - Winch Stand - CE31013G Review
- Search Results: ce31013g
- Q&A: What Kind of Paint Should be Used for Galvanized Steel of Boat Winch Mount # CE31013G
- Q&A: How To Convert a Boat Trailer from Center Rollers to Bunk Rollers
- Video: CE Smith Boat Trailer Roller Bunks Water Test
- Search Results: winch mounting plate
- Search Results: winch post
- Video: Buyers Products Trailer Hand Winch Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32005G Review
- Video: Fulton Single Speed Trailer Winch Review and Installation
- Video: Buyers Products Trailer Winch - Standard Hand Winch - 337HW800S Review
- Search Results: waterproof wire connector
- Search Results: trailer frame wire clips