Recommendation for Camping Trailer Receiver for Pulling Boat Trailer
Question:
What hitch do I need? Receiver on 28 foot skyline mountain view to pull 20 foot open bow boat
asked by: Dennis E
Expert Reply:
If your trailer's frame is between 18 inches and 51 inches on center, then I recommend the Curt RV hitch # C13702. This hitch is the strongest capacity we carry for tongue weights up to 500 lbs and a towing capacity of up to 5,000 lbs without weight distribution. It can bump up to 600 lbs tongue weight and 6,000 lbs max towing when using weight distribution.
If your trailer frame is between 22 inches and 72 inches wide on center, then I recommend the Curt RV hitch # 13703. This has a max tongue weight of 350 lbs and towing capacity of 3,500 lbs.
In either case, you will also need a ball mount, and I recommend the etrailer.com Ball Mount Kit # 989900. This will give you two ball mounts with different rise and drop and two hitch ball options along with the pin and clip and a storage bag. I've attached a video and an article to help.
You will also need the wiring, so I recommend using the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044 and then brackets # 18144 and # C57202.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 18 - 51 Inch Wide Frame
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Hitch for a Grand Design Solitude
- Q&A: Do The Puck Feet Of The Gen-Y Hitch Gooseneck Trailer Hitch For Puck Systems Lock Into Place
- Q&A: Hitch Recommendation for 2019 Winnebago Micro Minnie Travel Trailer
- Q&A: What is the Measurement For the Mounting Bracket Holes of the Stromberg Carlson Adjustable Hitch
- Article: Carrying Bikes While Towing a 5th Wheel Camper Trailer
- Q&A: Trailer Hitch for a 2017 Winnebago Fuse on a 2016 Ford Transit T350 Chassis
- Article: How to Carry Bikes While Towing a Travel Trailer
- Q&A: Is There a Bumper Mounted Bike Rack Capable of Carrying a Honda Trail 125 Behind a Class C Motorhome
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Do Holes Need To Be Drilled Into The Adjustable Arms Of The Stromberg Carlson Adjustable Hitch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)