Recommended Trailer Tire Pressure
Question:
pressure 245x75x2w.5
asked by: Jerry
0
Expert Reply:
On any trailer tire such as the Loadstar # AM1HP52 you always want to inflate the tire to the maximum cold psi, which on this tire is 50. Doing this will give you the best performance, allowing the tire to wear more slowly and give you optimum gas mileage.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- M - 81 mph
- Kenda
more information >
Continue Researching
- Q&A: Recommended Replacement Wheel and Tire for a 7.5-10 Tire
- Article: Trailer Tire Sizing
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Q&A: Will Curt Trailer Wiring C85FV Trigger Trailer Connected Message
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Replacement Tires and Rims for 155R12 Tires
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: Correct Cold Tire Pressure for Kenda Loadstar Bias Ply Tire AM1HP56
- Q&A: Recommended Replacement Tire For Coleman Pop Up Camper Trailer With 20.5x80x10 Tires
- Article: 2023 Holiday Must Haves
- Article: Printable Trailer Bolt Hole Pattern Template