Troubleshooting Prodigy P3 Brake Controller and Electric Over Hydraulic Brake Actuator Communication
Question:
Hello i have a a Carlisle serial no. 700617 hydraulic actuator on my trailer connect it to and HBA-CAM 381-7073, i own a ram 3500 5.9 diesel with the TEKONSHA PRODIGY P3 BRAKE CONTROLLER, but i m not getting the actuator to work hear it does not look compatible any idea maybe what combination would work. Thanks
asked by: Jorge A
Expert Reply:
It is likely the issue is that you are using the adapter module # HBA-CAM. The Prodigy P3 # 90195 will work with the Hydrastar brake actuators directly. The Carlisle name you may want to look up as some of the Carlisle Hydrastar actuators were recalled.
I can guarantee that the P3 controller and the # HBA-12 for drum brakes or # HBA16 for disc brakes will work without an adapter.
If your vehicle has a integrated brake controller, you will need to make sure it has been disconnected and the TIPM has been reconfigured after disconnecting the ITBM. I've attached and article to assist.
Products Referenced in This Question
Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1200 psi
- Drum Brakes
- Hydrastar
more information >
Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Hydrastar
more information >
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Recommended Dexter Suspension Kit 7753400