Troubleshooting Side Running Lights on Trailer that Arent Coming On
Question:
Year 2000 Timber Wolf trailer in closed 16 ft. Turn Stop and Running all work. The side running lights dont work at all. What can I do. I just put in a new tail light and that is ok. Thanks
asked by: John C
0
Expert Reply:
You'd want to verify that the power wire to the side running lights of your 2000 Timber Wolf trailer have power first with a circuit tester like part # PTW2993. If that checks out you'd then want to verify that the grounds for the assemblies are solid. A lot of the time they will ground through the mounting hardware so you'll need to verify that they are attached to a clean metal surface.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Troubleshooting Brake Controller Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working