Can Spacers be Used for Installation of Curt Hitch on 2018 Lexus GX 460?

Question

Question:

I purchased the Curt 13043. Instructions say to bolt right on. However, when I do so it slightly compresses/distorts the rear plastic panel. I am considering purchasing spacers to place between the hitch and the frame of the car, at each bolt, to lower the height of the hitch by 1/8 to 1/4 inch. A post above suggests removal of that narrow panel, or cutting that panel, but I would prefer not to do so for appearance. Are the use of spacers stainless steel a safe approach? in the alternative, does the slight distortion of that panel really matter? If not, I can simply bolt it on. Thanks.

asked by: Bill

0

Expert Reply:

I do not recommend using spacers to install the Curt # C13043 hitch on your 2018 Lexus GX 460; it needs to be flush against the bumper bracket of your vehicle. I do recommend trimming that panel slightly to remove the slight distortion and ensure the hitch is installed level.

expert reply by: Kyle S

0

Answer 1

While you are correct that we offer a couple great choices for Class III hitches for a 2022 Lexus GX 460, we cannot confirm whether hitch manufacturers are developing a design for a Class IV application. With that being said, the only current route…

view full answer...

Answer 2

Yup! The Curt Trailer Hitch Receiver #C13043 is confirmed to fit your 2022 Lexus GX 460. We actually have a review from a neighbor who installed this on their 2022 GX 460 and they said you may need to lower the tire for the installation. We…

view full answer...

Answer 3

I checked the measurements with one of the Curt Trailer Hitch Receivers #C13043 on our shelves and it has the same 7-7/8" outer holes measurement from center to center, 4-3/4" inner hole measurement center to center and I measured…

view full answer...

Answer 4

I confirmed with Curt the Curt Trailer Hitch Receiver part #C13043 is a fit for a 2021 Lexus GX 460. It features a simple bolt-on install and is currently the only available option.

view full answer...

Answer 5

The etrailer Hitch item #e46YR and the Curt Hitch item #C13043 are identical hitches with the exception of the powder coat finish. They are both confirmed to fit a 2016 Lexus GX 460. These bolt directly to the frame with included hardware. I…

view full answer...

Answer 6

Currently the only aftermarket receivers I can find for your 2022 Lexus GX 460 are the Curt #C13043 and our etrailer #e46YR. Both these receivers are only rated for up to 5,000lbs towing capacity and 500lbs of tongue weight. I even tried searching…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13043 will fit your 2022 Lexus GX 460. If you add this to your cart you'll be able to see the different shipping options and prices. Attached is a sample installation video…

view full answer...

Answer 8

The trailer hitch that will be the least visible on your 2016 Lexus GX 460 is the Curt Class III Trailer Hitch Receiver #C13043. The end of the receiver on this hitch does not extend as far from the rear mounting holes as the receiver on the…

view full answer...

Answer 9

The trailer hitch receiver we have for your 2014 Lexus GX 460 that sits closest to the bumper is the Curt Trailer Hitch Receiver part #C13043. I have attached a photo of each hitch on a similar Lexus to give you a better idea of how far it will stick…

view full answer...

Answer 10

When it comes to installing a trailer hitch on your 2022 Lexus GX 460 The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13043 from the closes hole to the end of the tongue is 2-1/2 inches. From the rear set of holes to the front…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Can Spacers be Used for Installation of Curt Hitch on 2018 Lexus GX 460?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching