Thule Roof Rack for a 2017 Chevrolet Bolt EV with Naked Roof

Question

Question:

would like to buy a thule cross bar roof rack for my 2017 chevy bolt which is pretty naked on top.

asked by: John

0

Expert Reply:

For your 2017 Chevrolet Bolt EV, I recommend the Thule Evo WingBar System which is composed of part # TH711420, part # TH480R, and part # THKIT1857. This system has aero crossbars which will work to reduce wind noise and drag. It also has t-slots which will allow for the use of most aftermarket t-slot accessories.

expert reply by: Conner L

0

Answer 1

For your 2020 Chevy Bolt, the roof rack recommendation will depend on if you have flush mounted rails that run front to back or no rails (naked) roof. If you have a naked roof, then I recommend the Yakima roof rack consisting of: Yakima JetStream…

view full answer...

Answer 2

The best roof rack for your 2023 Chevrolet Bolt EV is going to be the Roof Rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2 item #RRVA118B-2 RCL Legs for Rhino-Rack…

view full answer...

Answer 3

For your 2019 Chevy Bolt EV that has a totally naked roof we have the Yakima JetStream roof rack part numbers #Y00425, #Y28TR, #Y06123, and #Y06181 as a confirmed fit. This is a very aerodynamic roof rack that is easy to install and very high…

view full answer...

Answer 4

The best Yakima roof rack for your 2019 Chevy Bolt EV with a naked roof consists of: - Yakima JetStream Crossbars - Silver #Y00428 or Black #Y00425 - BaseLine Towers #Y28TR - Fit Kit #Y06123 & #Y06181 This roof rack is the best option for your…

view full answer...

Answer 5

Yes, the Custom Fit Kit #RR32SV is the fit kit you need for the Legs for the Rhino-Rack Aero Crossbars #RRRCL4 and the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long #RRVA118B-2. All of these parts will fit your 2021 Chevy Bolt…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…

view full answer...

Answer 10

Your 2008 Chevy HHR should have a set of rails on the roof that run from front to back. Which means we have the Rhino Rack part numbers #RRVA106B-2 and #RRSX100 as a confirmed fit, but the kit you mentioned is not a fit.

view full answer...

Answer 11

Yes, they can! The Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet item #TH52KE can be moved up and down your Honda CR-V's side rails. They do not screw into fixed positions so you're free to adjust them. Here are the rest…

view full answer...

Answer 12

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...

Thule Roof Rack for a 2017 Chevrolet Bolt EV with Naked Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching