Converting 7-Way Blade To 4-Way Flat On Trailer
Question:
My husband wants to replace the writing on our old 10foot coleman pop up camper. it is currently a 7 way blade and since our 2006 Nissan Xterra has a 4 way flat adapter he wants to rewire the trailer with a 4 way flat. Is it ok to run a 4 way flat to run the camper lights? The camper does not have electric brakes.
asked by: Diana
Expert Reply:
Yes, it is possible to convert your 7-way on your trailer to a 4-way. To replace the wiring on your Coleman 10 Foot pop up camper we offer wiring adapters that allow connection of different formats of trailer wiring. The best option to change the wiring on your trailer to match the 4-Flat on your Xterra is to cut off the 7-Way blade, and then install (them in) a trailer side 4-Way # A35W42B. The right turn function is the GREEN wire, the left turn function is the YELLOW wire, The trailer's ground point wire is the WHITE wire, and the brake light functions are for the BROWN wires. This is a wishbone harness so there are two brown wires, one for each side of the trailer.
Product Page this Question was Asked From
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 31 Feet and Longer
- Plug and Lead
- 4 Flat
- Optronics
more information >
Continue Researching
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Shop: Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: 5-Leaf Slipper Spring w/ Radius End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: 7-Way Round RV Style Trailer Connector - Trailer Side
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber
- Video: Trailer Wiring Harness Installation A35W42B
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
- Shop: Dexter 5-Leaf Slipper Spring w/ Flat End for 10,000-lb Trailer Axles - 30-1/2" Long
- Search Results: al91ab
- Search Results: al91rb
- Video: Optronics Wiring - Trailer Connectors - A35W42B Review
- Search Results: mcl36rb
- Shop: Trailer Wiring
- Video: Optronics LED Amber Clearance and Side Marker Light Review
- Search Results: dw05744~5
- Search Results: 2 1/2 receiver
- Search Results: lock cylinders
- Video: Optronics Combination LED Trailer Tail Light Installation
- Video: Optronics Sealed Mini Rectangular LED Stud Mount Trailer Clearance Light Installation
- Video: Optronics Trailer Lights - Tail Lights - STL9RB Review
- Video: Optronics Trailer Lights - Clearance Lights - MCL95AB Review
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: d ring anchor
- Shop: Vehicle Tow Bar Wiring
- Q&A: How Long is the Power Wire Attached to the # MCL95AB LED Clearance Light
- Q&A: Wiring a 7-Way to a Trailer with a 6-Way that Uses Non Standard Colors
- Q&A: How To Wire In a 7-way to Replace a Boat Trailer 5-Way Flat
- Q&A: Which Wire of Trailer Brake Magnets Gets Ran to Power and Which to Ground
- Q&A: Troubleshooting Trailer Brakes that Lock Up When Connected to Junction Box
- Q&A: Wiring Brakes On Tandem Axle Trailer