Recommended Gooseneck Trailer Hitch for a 2008 Ford F-350 with an 8 Foot Bed
Question:
Will a 2106 factory installed gooseneck set up for a Ford 350 powerstroke be interchangeable with a 2008 350 powerstroke? I believe the 2016 is a 6 foot bed and the 2008 is a 8 foot bed but there is a difference in length. Thank you.
asked by: Benson
Expert Reply:
I do have gooseneck hitch options for your 2008 Ford F-350 but we do not sell OEM gooseneck hitches therefore I would not be able to confirm compatibility between a 2008 Ford F-350 and a 2016 Ford F-350. However, a 2008 F-350 is a completely different generation than a 2016 F-350 therefore it is highly unlikely that the hitch will work for you.
For a 2008 Ford F-350, I recommend using the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1108. This hitch is considered to be one of the best in the industry. It has a 30,000 lb towing capacity and comes with a 2-5/16"hitch ball that can be turned over for a clean look while not in use. The best feature of this gooseneck hitch however is that you can easily switch to 5th wheel towing without having to cut or drill any holes by using the B&W Companion 5th Wheel Trailer Hitch part # BWRVK3500-5W.
I have attached an install video of the gooseneck hitch and a review video of the 5th wheel hitch for you as well.
Products Referenced in This Question
B&W Companion 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
- Fifth Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Double Pivot
- Standard - Double Jaw
- 16-1/4 - 18-1/4 Inch Tall
- B and W
more information >
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: What is Overlanding? How to Start your Overlanding Journey
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Replace or Install an RV Roof Vent
- Article: 2023 Holiday Must Haves
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Pintle-Hitches