Dimensions of Detail K2 Mighty Multi Utility Trailer

Question

Question:

Is the inside width *exactly* 48, or is there enough extra room maybe 1/4" to be able to fit a 48 inch sheet of plywood inside? I know the 72 inch length wouldnt accommodate a standard 4x8 sheet, but just wondering about the width, assuming the plywood would overhang on the front or back. Thanks.

asked by: Jase

0

Expert Reply:

We have a Detail K2 Mighty Multi Utility Trailer # K2MMT4X6 here so I went to measure the bed and it was approximately 47-3/4" wide, so there would not be enough room to fit your 48" wide plywood.

There is another version of this utility trailer available which will work for you, the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. This trailer has a bed which is 88" long x 52" wide which is enough room to carry your 48" plywood. This is an A-frame trailer with six tie-down locations and an included channel coupler.

I've added links to video review of this trailer for you to check out.

expert reply by: Kyle S

0

Answer 1

So long as your trailer hub is able to accept larger wheels, you have the same bolt pattern, and there will be enough clearance for a larger tire you can change from a 12 inch wheel to a 15 inch wheel like the Dexstar Steel Spoke Trailer Wheel…

view full answer...

Answer 2

There are a few things you will want to look at when changing wheel sizes. First, a 16 inch wheel and tire is going to be taller than a 12 inch. You need to make sure there is room above the existing 12 inch tire and wheel to go to a 16 inch set up.…

view full answer...

Answer 3

The sides are not removable on the 6' long Detail K2 Mighty Multi Utility Trailer item #K2MMT4X6. They come attached to the base unlike the item #K2MMT5X7 which has to be completely assembled so the sides can be removed whenever necessary. You…

view full answer...

Answer 4

I recommend the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D #AM32424 which are rated for 2,150 lbs at 65 psi but are also rated for speeds of up to 81 mph. I have added a link to a video review to…

view full answer...

Answer 5

Yes when you do an over-under kit you have to weld the seats to the axle for it to be installed properly. It is recommended to tack weld the new spring seats into place but a complete weld job is not required when installing the over-under conversion…

view full answer...

Answer 6

You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…

view full answer...

Answer 7

A 4.80-12 trailer tire and wheel such as the Kenda #AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so…

view full answer...

Answer 8

The difference between the tire diameter you'd have now and a 14 or 15 inch trailer tire size would be about 6 inches. This would take up about 3 inches of your current fender to tire clearance so you'd need to make sure that wouldn't be…

view full answer...

Answer 9

I would recommend the Karrier ST205/75R14 with White Wheel part #AM32153. This has a radial tire (preferred over bias plys) and a rim with a 5 on 4-1/2 inch bolt pattern that should work well. I attached an FAQ on trailer tires for you to check out…

view full answer...

Answer 10

In order to change tire sizes you will want to measure the clearance you have with your existing tires and compare that to the difference in size. As a general rule of thumb you are going to want around 3-4" of clearance between the top of the…

view full answer...

Answer 11

In order to determine the towing capacities of your 2010 Chevy Aveo I would recommend checking the owners manual of your vehicle for that information. It should be listed there under towing information. If your owners manual says not to tow with your…

view full answer...

Answer 12

I do have a solution for you, however the Curt Class I Receiver Hitch #C11331 referenced in your question is designed to fit the sedan model of the 2009 Chevy Aveo. If you have the 2009 Chevy Aveo 5-door hatchback, I instead recommend the Curt…

view full answer...

Dimensions of Detail K2 Mighty Multi Utility Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching