Bypassing Factory Brake Controller of 2011 GMC Sierra
Question:
Hello, I have a 2011 GMC sierra 2500 HD with an ITBC I hook on to my trailer and everything works BUT the brakes. I hooked onto a few different trailers that I know everything works and my truck still does not pick up the signal that there is a trailer connected. I tested the brake pin on the truck side and it does not light up, the test light just blinks once and thats it nothing else. I put a brand new trailer plug and cord on the trailer side going into the junction box everything is exactly where it should be all my connections look good etc. I tried a new plug on the truck side and still nothing. The trailer connected message does not display and I do not get any trailer gain when hooked on to any trailer. Any ideas on what it could be and or how to test the rest of the truck? Relay? ITBC module? etc.
asked by: Jake
Expert Reply:
It sounds to me like your integrated brake controller is not able to sense a trailer connection due to an internal problem and needs to be replaced.
I attached a help article that covers the entire process of installing an aftermarket brake controller in a GM truck like yours with an integrated brake controller.
Basically you will wire the P3 part # 90195 to the wire bundle that is under the dash near the brake pedal. I also attached a picture that shows where this is.
There are some connections that will need to be made at the rear of the vehicle and under the hood as well.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: RV Interior Lighting
- Shop: 9V LED RV and Utility Light - Single - 5-1/4" Long x 2-7/8" Wide - Black Housing
- Shop: Suspension Enhancement
- Search Results: 5813
- Search Results: air lift 5813
- Search Results: al50201
- Shop: Towing Mirrors
- Search Results: 20147
- Shop: Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Search Results: trailer safety chains
- Shop: A-Frame Trailer Coupler - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14,000 lbs
- Shop: Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K
- Shop: Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2-5/16" Ball - 12,500 lbs
- Search Results: rv interior lights
- Search Results: interior lights
- Q&A: GloBrite 126R/126Y Red Replacement Light
- Q&A: Bypassing Factory Brake Controller and Installing Aftermarket Model on 2018 GMC Sierra 3500
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Video: Trailer Brake Controller Installation - 2011 GMC Sierra 90195
- Q&A: Disabling the GM Factory Installed Integrated Trailer Brake Control (ITBC) on 2018 Silverado 2500 HD
- Q&A: How to Disable OEM Brake Controller When Installing Aftermarket Controller
- Q&A: How to Bypass Factory integrated Brake Controller on a 2014 Chevy Silverado 3500
- Video: Trailer Brake Controller Installation - 2011 Chevrolet Silverado tk90160
- Article: Troubleshooting Brake Controller Installations
- Shop: Trailer Wiring
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado