Tailgate Assist for 2005 Toyota Tundra

Question

Question:

tailgate lower assist - Does it fit a 05 tundra?

asked by: Bruce

1

Helpful Expert Reply:

There is a tailgate lowering assist that is a fit for your 2005 Toyota Tundra, though not the DeeZee # DZ43205 you referenced. Instead, you need the Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211, which is a torsion bar that essentially makes your tailgate feel much lighter. Our customers who have used this have given it very high ratings as you can see on the product page.

I've added a link to a video review of this lift assist for you to check out as well.

expert reply by: Kyle S

1

Answer 1

Yes, the Tailgate EasyLift #74211 will fit all models of the 2005 Toyota Tundra included the Double Cab. I have included a link to a video review of the EasyLift for you.

view full answer...

Answer 2

The tailgate lift assist #74211 for your 2005 Toyota Tundra is going to be applying some force on the inner part of the tailgate but the force is not so great that it would dent or chip paint from the tailgate. We have not had any complaints about…

view full answer...

Answer 3

Unfortunately we do not currently have a tailgate assist confirmed to fit a 2006 Toyota Tundra. That being said, we do have the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 that's a universal-fit design. This would require you to…

view full answer...

Answer 4

I have included a video that briefly goes over installing the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 but we do not have a video that goes over the entire installation process. As you can see in the video you will need to drill a…

view full answer...

Answer 5

As shown in the attached video at about the 32 second mark, the template is used to show where to drill the hole in the truck tailgate post and then in the tailgate itself. You want to make sure you mark and drill the holes that are designed for…

view full answer...

Answer 6

We sure do! There is currently only one tailgate lift assist option confirmed to fit your 2000 Toyota Tundra which is the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211. The Hopkins #74211 will assist the opening and closing of your…

view full answer...

Answer 7

We have a Hopkins tailgate assist with the part #74211 but we don't have an option from DeeZee. I actually prefer the Hopkins style since it makes lifting and lower much easier, whereas the DeeZee just makes lowering easier.

view full answer...

Answer 8

I have another option for you, but the DeeZee Tailgate Assist Custom Tailgate-Lowering System for Pickup Trucks #DZ43205 you were looking at is designed to fit a 2017-2021 Ford F-250/350/450 and will not fit your 2005 Toyota Tundra. Instead I…

view full answer...

Answer 9

On your 2005 Toyota Tundra the factory plug to plug in a brake controller is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. However, it is possible that it is up above the…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Tailgate Assist for 2005 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching