Difference Between Landing Gear Replacement Follow Legs from Lippert and Stromberg Carlson

Question

Question:

Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for Lippert Components RVs and Stromberg Carlson . Is there any difference between these except price

asked by: Gerald

0

Expert Reply:

I believe you are asking about the Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear # LG-179014 and the Replacement 5th Wheel RV Landing Gear Follow Leg w/ Snap Pin for Lippert Components RVs # LC179014.

If so, these two legs are going to be the same, with a 4,000 lb weight capacity and 29-1/2" leg length. The Stromberg Carlson # LG-179014 is designed to be used with landing gear # LG-1, # LG-3, and # LG-183708 but will be compatible with landing gear from most manufacturers.

expert reply by: Kyle S

0

Answer 1

Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The…

view full answer...

Answer 2

It appears your 2020 East to West Tandara 385MB uses the Lippert Ground Control 3.0 #LC675817 leveling system. If this is what you have we do have the Replacement Front Jack #LC362485 which attaches to the Motor #LC343758. Lippert does not offer the…

view full answer...

Answer 3

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 4

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 8

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 9

I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Difference Between Landing Gear Replacement Follow Legs from Lippert and Stromberg Carlson

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching