AKHD-545-35-EZ-K Lug Nut Torque Specs
Question:
Hi there, just looking for guidance on how to determine torque specs for my lugs using this hub AKHD-545-35-EZ-K with 15 inch wheels. Thanks!
asked by: Nico
0
Expert Reply:
When putting on wheels and the lug nuts, the specs don't have much to do about the hub other than the size of the size of the lug nut. Since the # AKHD-545-35-EZ-K fits 1/2 inch studs torque them according to the lug nut specification, on the attached picture.
expert reply by:
Timothy G
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Q&A: Where is the Width of # AKHD-545-35-EZ-K Measured at
- Q&A: How to Select Compatible Replacement Hub/Drum for Dexter Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Article: Overview of Lubricating Grease
- Search Results: x~track
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Video: Optronics Trailer Lights - Utility Lights - UCL65CB Review
- Video: Review of etrailer Tie Down Anchors - E Track Backing Plate 4 Pack - e66RR
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Best Grease Recommendation to Pump Into EZ Lube Spindle
- Shop: CargoSmart Horizontal or Vertical X Track - Zinc Plated Steel - 667 lbs - 5' Long
- Search Results: tie down straps
- Search Results: e~track backing plates
- Search Results: e~track
- Search Results: tie down axle strap
- Search Results: e track backing plate
- Video: LubriMatic Tools - Grease and Lubricants - L11390 Review
- Video: LubriMatic Tools - Grease and Lubricants - L30416 Review
- Video: Review of LubriMatic Grease and Lubricants - Standard Pistol Grip Grease Gun - L30-310
- Video: LubriMatic Standard-Duty Lever Action Grease Gun Review
- Search Results: electric drum brakes
- Q&A: Recommended Grease for E-Z Lube Spindles on Travel Trailer
- Q&A: What Brand/Kind Of Grease Is Compatible With The Pre-Greased Hubs AKHD-550-35-K
- Q&A: Which Grease Should be Used with a Dexter Trailer Axle
- Q&A: Determining if Trailer Hub is Oil Bath or Grease