Troubleshooting Display of Prodigy P2 that Shows Two Dashes
Question:
I just hooked my controller in my new Silverado and it has a flashing line on either side of the 2 dots, just wondering what this is
asked by: Mike
Expert Reply:
For the Prodigy P2 Trailer Brake Connector # 90885, the controller should first read n.c. for 15 seconds before changing to 2 dots with no letters, _._. When the brake controller reads 2 dots with no letters, it is an indication that the brake controller does not have a connection with the trailer. I have attached a cutting from the installation instructions explaining the displays. The instructions are also linked for you.
I confirmed with my contact at Tekonsha that the only meaning of the 2 dots display is that the controller first displayed n.c. for 15 seconds, then switched to _._., indicated the trailer is not connected.
If you only see the _._. display when the trailer is not connected, your controller is working properly.
If your controller is switching back and forth between being connected to the trailer and not being connected while you are towing, I recommend checking your trailer wiring connector and vehicle connector inside and out for any dirt, debris, or corrosion that could be causing a weak or spotty signal between the connectors. If you find any dirt or corrosion, try cleaning the connectors so the brake controller can have a solid connection with the trailer.
If the P2 is still having trouble maintaining a connection to the trailer after the connectors are clean, or if you didn't find any dirt or corrosion, feel free to let me know and we can look into further troubleshooting.
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Chart With Error Codes Explained for the Prodigy P2 90885
- Q&A: Meaning of Error Code PL with Prodigy P2 Trailer Brake Controller 90885
- Q&A: Troubleshooting 2 Flashing Dots and 2 Flashing Bars on Prodigy P2 Brake Controller
- Q&A: What is Indicated when Prodigy P2 Displays 2 Dots with No Letters
- Q&A: Recommended Rubber Wiper Seal with Track for RV Slide Out
- Shop: Glantastic 12V RV LED Puck Light - Recessed - 4-1/4" Diameter - White Housing
- Shop: Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 15' Long x 3-3/16" Wide
- Shop: Rubber Wiper Seal with Bulb for RV Slide Out - 3/16" Flange - 40' Long x 2-7/8" Tall
- Shop: Rubber Top Lip Wiper Seal for RV Slide Out - Press On - 30' Long x 2-1/2" Wide
- Shop: Gustafson 12V RV LED Puck Light - Recessed - 3-1/2" Diameter - White
- Shop: Gustafson 12V RV LED Puck Light - Surface Mount - 3-5/8" Diameter - White
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: RV Interior Lighting
- Shop: Brake Controller
- Video: Review of Steele Rubber RV Slide Out Parts - Seals - SR98FR
- Video: Review of Steele Rubber RV Slide Out Parts - Seals - SR38FR
- Q&A: Installing and Using a Lube Plate Instead of Grease on a 5th Wheel Trailer Hitch
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Video: etrailer Class III Trailer Hitch Installation - 2016 Jeep Cherokee
- Article: How to Choose the Right Trailer Hitch Class