Parts Recommended to Tow a Trailer with a 2017 Honda Pilot
Question:
I am looking to install a 7-way trailer connector. I do not think my Honda Pilot has the tow package, as it has no hitch, but there is a white rectangular connector in the rear drivers side. Can I install a 7-way in this vehicle? If I want to install a brake controller as well for my pop-up camper brakes, what would you recommend? thank you.
asked by: Joe
Expert Reply:
It sounds like you don't have the tow package since you don't already have a connector or trailer hitch receiver. But that doesn't mean you can't add them. Adding a 7-way first requires a 4-way connector, like part # 118760. It plugs into that connector you found. Then you're going to convert it to a 7-way using our # ETBC7 kit. The kit includes everything you need for the fully functioning 7-way, including all the wiring you need to connect a brake controller. I've linked a video on the adapter being installed in a CR-V. It's a universal install so the process is basically the same.
Then for a brake controller I recommend our most popular one the Prodigy P3, part # 90195. It's the easiest to use becuase of the LCD and easiest to install because of the automatica leveling feature.
You also said you don't have a hitch receiver yet. I recommend the etrailer, part # e98840. This install video is also attached. Then you need a ball mount. I've linked our selection to fit the hitch as well as an article to help you determine the correct rise or drop you need with your trailer.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Conversion Kit For Motor For # 781005
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Installation of Trailer Wiring Harness on a 2022 Honda Pilot
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: B&W 4 Inch Offset Gooseneck Ball for a 2015 GMC Sierra 2500 Short Bed
- Q&A: Recommended Replacement AC Unit For A Coleman Mach On A 2000 Mesa Pop Up Camper
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: My Trailer Hitch Doesn't Fit