Dimensions of Ultra-Fab Steel Jumbo Roller UF48-979023 for Trailers and RVs

Question

Question:

I am interested to purchase 2 ultra -fabe steel jumbo for my trailer part # UF48-979023. The problem that I am having is that your ligature states that the product states it is 3inch tall but your video states that it is 3.50inch tall. what is the correct overall length? I need a 3.5inch tall unit please get back with me A.S.A.P.

asked by: Paul B

1

Helpful Expert Reply:

The Ultra-Fab Skid Wheel part # UF48-979023 measures 3-1/2-inches tall overall, including the weld-on mounting bracket. Just the round wheel part only is 2-1/2-inches tall. Please refer to the linked photo for dimensions.

expert reply by: Adam R

1

click to enlarge

Answer 1

I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle. This measurement…

view full answer...

Answer 2

For a 4-way trailer wiring harness for your 2017 Lexus RX350 that has the tow package you would want the part #56083 which is a confirmed fit. This harness does not have a converter box built into it and it just plugs right into a port you have at…

view full answer...

Answer 3

The LaSalle Bristol XTRM PVC RV Roof Membrane #3441700534142711440 ships rolled up on a tube just like how it's pictured.

view full answer...

Answer 4

We do have the LaSalle Bristol XTRM Roof Installation Kit #3442703414KIT that is used to install the LaSalle Bristol XTRM Roof Membrane #3441700534142711440 that you referenced. I'd check with local RV dealers to you to see if any can install…

view full answer...

Answer 5

I've actually answered a similar question on this before and found: In my research I found that the grease seal you are looking for could have an inner diameter of either 2.24 or 2.12 inches and an outer diameter of 3.37 inches when measured with…

view full answer...

Answer 6

The correct replacement for the Oil Seal 225255UC is the Oil Seal part #9103309. These both have a 2.24/2.25" inner diameter and 3.37" outer diameter. They are also designed for use with oil bath hubs.

view full answer...

Answer 7

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 8

Unless otherwise stated on the wheel itself, wheels themselves will be able to withstand the psi rating of any tire that is confirmed to fit it. The piece that you will want to look at is the valve stem. If you have a rubber valve stem then the…

view full answer...

Answer 9

Those look to be the slide flange-to-flange measurements, and we do have the correct slide toppers in black for each of them: - 74 Inch Measurement: Solera RV Slide-Out Awning #LCV000168105 - 159 Inch Measurement: Solera RV Slide-Out Awning…

view full answer...

Answer 10

Sounds like you are looking for a 7-way for a brake controller and a 12v hot lead for your 2008 Toyota Tacoma, so I would recommend the Universal Installation Kit for Trailer Brake Controller, part #ETBC7. This includes everything needed to install…

view full answer...

Answer 11

For your application there really is only going to be a weld on solution that's reasonable like the part #UF48-979022 that you referenced. The frame dimensions are unknown so a weld solution would be better since that really doesn't matter.…

view full answer...

Answer 12

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Dimensions of Ultra-Fab Steel Jumbo Roller UF48-979023 for Trailers and RVs

Product Page this Question was Asked From

Continue Researching