Brake Controller, Install Harness, and Truck Bed 7-Way Kit For 2001 Dodge Ram 1500
Question:
I have a 2001 dodge ram 1500. I am looking to put a brake controller and a 7 way plug in the bed for a 5th wheel. The truck does not have a tow package. What equipment do I need? I know I need a brake controller and a 7 way plug but wiring harnesses do I need? How much would everything that I need to install it cost me?
asked by: Shane D
Expert Reply:
You'll need three things. A brake controller, the wiring to install it, and then a 7-way kit designed to install in the bed of a truck. So let's first start with a brake controller.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well. To install this all you need is the install harness part # 3020-P which installs under the dash of your truck.
For a 7-way to install in the bed of your truck to make connecting your trailer lights easier you would want the part # 41157. Most 7-ways will be at the rear of the truck near the bumper which doesn't work well with fifth wheel hitches. This kit installs in line with the 7-way at the rear of your truck and gives you a second one to install in the bed.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 10 Feet Long
- Custom Fit
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Parts Needed to Tow a Trailer with a 2015 Honda Pilot