Availability of Replacement Mounting Hardware for Brush Guard on 2007 Chevy Silverado 2500HD

Question

Question:

What is the part number for a brush guard mounting kit for 2007 Chevy 2500HD?

asked by: Jake R

0

Expert Reply:

We do have a large selection of replacement mounting kits available for brush guards that are confirmed to fit your 2007 Chevy Silverado 2500HD. Both the grille guard itself and the mounting brackets they work with are vehicle-specific, meaning in order to find the correct hardware, you will need to determine what model brush guard you have.

For example, if you happen to have the Westin Sportsman Grille Guard # 40-1245, which is confirmed to fit your Silverado, the correct Replacement Hardware Kit is part # 40-124PK.

If you can tell me what model brush guard you have, I will be happy to confirm the correct hardware kit. If you cannot locate this information, please feel free to email me a picture of what you have and I will be happy to take a look to see if I can identify it.

expert reply by: Chris R

0

Answer 1

Grille guards are designed to fit specific vehicles. Replacement mounting hardware for Westin grille guards is specific to both the vehicle and the grille guard model. Both the grille guard and mounting hardware will need to be confirmed by Westin…

view full answer...

Answer 2

Thanks for the photos. For your replacement brackets you will want the Replacement Hardware Kit for Westin Sportsman Grille Guard #40-018PK. These brackets are black powder coated and are the correct brackets for the black or chrome grille guards.

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Availability of Replacement Mounting Hardware for Brush Guard on 2007 Chevy Silverado 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching