Do CE Smith Bunk Brackets # CE10192GA-4 Have a Weight Capacity
Question:
Current bunk configuration is hitting the strakes on my boat. I wanted to remove the most forward portion of the bunk boards, which is about 4ft and create a new bunk placement for the bow. Will this part work on a C channel cross member? The trailer cross member is not tubular thus the amount of surface area is reduced. What is the weighted rate load limit for this item? Thank you for your help. All the best,
asked by: Eric C
Helpful Expert Reply:
Based on the picture you submitted it looks like your trailer was originally intended for a different boat and you'd need to made some modifications to it to get all of the bunks to fit the hull proplerly.
The CE Smith Double U-Bolt Bolster and Swivel part # CE10192GA-4 don't have a weight capacity that is stated aside from CE Smith saying they will basically have the same weight capacity as the bunks that are installed on them.
Ideally you'd box the frame of your trailer where you wanted to install the # CE10192GA-4 as that will provide it with more support.
Product Page this Question was Asked From
CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Boat Trailer Parts
- Bunks
- Swivel Bracket
- U-Bolt Bunk Bracket
- 11-3/4 Inch Tall
- 2 Inch Tall
- 1-1/2 Inch Wide
- 4 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 12-1/4" - Qty 4
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Shop: CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 15" Tall - Qty 1
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Locknut for Bolster and Swivel Bracket Assemblies - 1/2" Diameter - Zinc - Qty 1
- Shop: CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 8" Tall - Qty 2
- Shop: CE Smith Heavy Duty Swivel Bracket - Galv Steel - 2-1/2" Hole Centers - Qty 1
- Search Results: bunk supports
- Search Results: bolster bracket
- Q&A: Can CE Smith Bunk Brackets CE10196G-4 Be Used with 7k Boat
- Q&A: Availability of Heavy Duty Brackets for Large Boat
- Q&A: Can Bunk Brackets Work as Replacements for Welded On Supports
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Shop: Brake Controller
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: dust cap
- Shop: Fifth Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class