Parts Needed to Flat Tow 2012 Suzuki SX4 with Ready Brute Elite Tow Bar

Question

Question:

Will the Roadmaster EZ Base Plate Kit - Removable Arms Item # 521019-1 work with the ReadyBrake Elite Towbar with the 1/2 Clevis Roadmaster Connectors? Visually they dont look compatible. If not, is there another Adaptor that will work for that set up, or what towbars will they work with? Thanks!

asked by: Todd H

0

Expert Reply:

The only adapter we have that will work with a Ready Brute Elite Tow Bar is the part # BX88297 which is designed for Blue Ox base plate kits. For a Blue Ox base plate kit that fits your 2012 Suzuki SX4 we have the part # BX3522 which is a confirmed fit.

expert reply by: Jameson C

0

Answer 1

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 2

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights…

view full answer...

Answer 3

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 4

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 5

I wish it was that easy! But no you can use the tow loops in place of a base plate kit like the Blue Ox part #BX1133.

view full answer...

Answer 6

It sounds like you may have a 7-way trailer connector and a 4-way trailer connector on your truck and only a 4-way connector on your trailer. Is that correct? See the attached picture for examples of each. If this is the case, then this change will…

view full answer...

Answer 7

I was able to confirm with my contact over at Hopkins, who manufacture the Brake Buddy Classic 3 #HM39494 that you will want to use the standard setting with your 2017 Jeep Wrangler. You would only want to use the "hybrid" setting…

view full answer...

Answer 8

Looking at the installation instructions for base plates #RM-521448-5 you will need to remove the air damn, trim it according to the instructions, and then reinstall it. Trimming is needed for proper installation of the base plates.

view full answer...

Answer 9

If that aftermarket bumper is a Warn Rock Crawler number 74255 then yes, there are some base plates that will fit! Or if it is a Warn/Mopar bumper, part numbers 82211715, 82211715AB or 82209740AD & skid plate part numbers 82210401 or…

view full answer...

Answer 10

Blue Ox is very thorough with their testing so if they told you that one of their tow bars like the #BX7420 would attach directly to the lugs of your AEV Premium Bumper it would be true this is possible and would work great.

view full answer...

Answer 11

Sure thing, I'd love to get you all set up and in your way! For your 2015 Jeep Wrangler Unlimited with a stock bumper, you're going to need to grab a set of wiring #RM-154, tow bars #RM-676, a braking system #HM39524, and a base plate…

view full answer...

Parts Needed to Flat Tow 2012 Suzuki SX4 with Ready Brute Elite Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching