Rhino-Rack Roof Tracks and Heavy Duty Crossbars for a Camper Shell

Question

Question:

Looking to buy item RRRTS535 Rino tracks to get the full length of truck cap use. Will Rino crossbars # Y01-120B-NT fit on these tracks?

asked by: John

0

Expert Reply:

Rhino-Rack Roof Rack # Y01-120B-NT was designed for Thule and Yakima tracks. For the Rhino-Rack tracks # RRRTS546 you can use RLCP legs # RLT500 and bars # RB1375B-2.

expert reply by: Michael H

0

Answer 1

Yes, the Rhino-Rack Roof Rack for Factory Tracks part #Y02-480B-NT works with the Rhino-Rack RTC-Style Roof Rack Tracks like part #RTC16 or any other length.

view full answer...

Answer 2

The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels…

view full answer...

Answer 3

The Yakima SkyBox NX 16 Roof Cargo Box - 16 cu ft - Black Carbonite #Y95NX you referenced is absolutely compatible with Rhino-Rack Vortex Aero Crossbars. The crossbar spread simply need to be between 24 and 36 inches on center.

view full answer...

Answer 4

We had the Rhino-Rack Track Mount RLTP Legs, #RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima…

view full answer...

Answer 5

I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, #RB1375, the leg…

view full answer...

Answer 6

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 7

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Rhino-Rack Roof Tracks and Heavy Duty Crossbars for a Camper Shell

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching