Recommended 6 Inch Drop Ball Mount with Extended Length for a 2 Inch Trailer Hitch Receiver
Question:
Can i get an extended length ball mount with a 6 1/2” drop? 2” receiver.
asked by: Frank
Expert Reply:
I recommend using the Curt Ball Mount part # D-28 which has a 6" drop. We do not have a 2" ball mount that offers exactly 6-1/2" of drop with an extended shank but since the vehicle will squat a bit while attached to the trailer, the 1/2" difference will not be an issue for you. This ball mount slides into a 2" receiver tube opening and works with hitch balls that have a 1" diameter shank.
If you need a hitch ball I recommend using part # C40002 for 1-7/8", part # C40004 for 2", or part # C40005 for 2-5/16". You will also need a hitch pin if you do not already have one and for that I recommend using part # C21500. I have attached a review video on the ball mount in addition to a photo with it's dimensions for you as well.
Products Referenced in This Question
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 3500 lbs GTW
- Class III
- CURT
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Q&A: Recommended Hitch for a 2014 Dodge Grand Caravan
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Does Curt Heavy Duty Forged Ball Mount Have a Solid Shank
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: Parts Needed To Install 7-Way & Trailer Brake Controller On 2024 Grand Highlander With Factory 4-Way
- Article: Trailer Wiring Diagrams
- Q&A: Wiring Installation for 5th Wheel Landing Gear Switch
- Q&A: Hitch and 4 Bike Rack Recomendation for 2015 Honda Odyssey
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)