Timbren 5,200 Pound Axle-Less System Hub and Drums and Electric Brake Assemblies
Question:
Hello, Is the same type of kit for the item listed below - from your web-site available for the 5200 lb spindles ie, with electric brake hubs? If so, could you advise on the price/item number? Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs Item # A35RS545E Looking for just a bit more weight capacity, but like the idea of a complete kit.
asked by: Corey M
Expert Reply:
The 5,200 pound Timbren Axle-Less systems do not come with hubs and drums so your best option in this capacity is to go with # ASR5200S01 and add the hub and drum assemblies and brakes. For the hub and drum assemblies you would need 2 of # 8-201-5UC3-EZ. These have a 6 on 5-1/2 bolt pattern though. There are no assemblies that will fit the spindles on the 5,200 pound Timbren systems AND have a 5 on 4-1/2 bolt pattern. This means if your wheels are 5 on 4-1/2 you would have to replace them too. Also you may need different seals, # RG06-070, to better fit the spindles than the seals included with the hubs and drums.
For brakes that fit the above hub and drum assemblies use # AKEBRK-7-SA for a left and right set.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Q&A: Replacement Strut for Stabilus Lift-O-Mat on Dometic Awning
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Best Replacement for Old 6.00-16 Trailer Tires
- Article: Trailer Lighting Requirements
- Article: Trailer Hitch Receiver Sizes