Axle Replacement for Dexter SLR P12 #13 Torflex Axle

Question

Question:

I need complete assembly axel replacement for Dexter S/N D4963763, Model SLR P12

asked by: Cesar R

0

Expert Reply:

It took a little while to get your information from Dexter. Your axle is a #13 Torflex Axle which is rated for a capacity of 8,000 lbs. We don't have an 8,000 lb capacity replacement, but we do have 7,000 lb capacity Axle-less Systems you may want to consider or tandem axle applications to get you to your capacity needs.

For the Axle-Less system you may want to consider the Timbren Axle-Less Trailer Suspension # TASR7KS01 or the 4 inch drop axle # TASR7KS02. These will allow you to mount directly to your frame and use a 2 inch square bar for assistance between the axles using the integrated holes.

Your other option would be to use two of the 5,200 lb systems # ASR5200S01 as a tandem axle option.

Let me know if you have further questions.

expert reply by: Jason S

0

Answer 1

You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub…

view full answer...

Answer 2

I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…

view full answer...

Answer 3

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement screen #BVD0434-31, the replacement lid #BVD0449-A01, and the replacement…

view full answer...

Answer 4

We do not carry the replacement axle for your P12 7K Axle. We do however have the brake assemblies and bearing kit or hub/drum assemblies to assist based on what I can find online for a 7K Dexter axle. You will most likely want the Bearing Kit,…

view full answer...

Answer 5

The only thing I found on your Dexter 70-7 is the Replacement 13" Rotor for Dexter Disc Brakes #K71-631-00 which has 70-7 stamped on it. The #K71-631-00 fits 8,000 lb. Dexter disc brake kits like the #K71-646-2, #K71-646-2-91 or…

view full answer...

Answer 6

The backing plate you are referring to is, I'm assuming, the brake mounting flange, which should be welded on. The dimensions of this are extremely important because it will determine the brake assemblies that fit. The Demco Trailer Brake…

view full answer...

Answer 7

I reached out to Timbren and they do not recommend using the Timbren Axle-Less Trailer Suspension System #TASR7KS01 for triple axle applications because of weight balancing. Although ideally it would work if the load was perfectly balanced, there…

view full answer...

Answer 8

Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.

view full answer...

Answer 9

The maximum deflection or compression/movement of the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01 is 1-5/8 to 1-7/8 inches. That's the amount it will move from zero load to full compression.

view full answer...

Answer 10

I attached a picture that has all of the dimensions available for the Timbren 7k Axle Less System part #TASR7KS01 that you referenced.

view full answer...

Answer 11

For a 6" or 8" axle, I'm not seeing anything for that unfortunately - however, for your 14K livestock trailer, I recommend checking out the Timbren Silent Ride Suspension for Tandem Axle Trailers #TSR14K35T01. This system…

view full answer...

Answer 12

From the carpeted "floor" to the top of the railing on the 90" x 26" MORryde RV Cargo Sliding Tray #MR87FR measures 3-1/2" (see attached). If you jump to the 3 minute mark of the linked review video you…

view full answer...