Replacement Vent Cover with Track on Side for Raising or Lowering Lid

Question

Question:

I have a 2006 Palomino Popup. Im looking for the vent cover. All the covers I see have the track in the middle of the lid/cover. Mine is on the side about 3 inches from the edge. plus it has a piece that allows the lock to go around. Where can I acquire this type? Thanks

asked by: Chris M

0

Expert Reply:

I believe the vent cover you are looking for is the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted # FVK1020-19. I've attached a video to assist.

I've also attached the 4 hinge options in a photo to give you a clear look at the options.

expert reply by: Jason S

0

click to enlarge

Answer 1

We do indeed have a battery box that's specifically designed for that battery. The part number is #HM20120. You can see current pricing by clicking the provided link. The box can be ordered online by using the provided link.

view full answer...

Answer 2

I spoke with Fan-Tastic Vent and was able to use the model number you provided "FV6350LWUSD81" to confirm that you need the Replacement Dome for Fan-Tastic Vent RV Roof Vents part #FVK1020-19 as this is the correct replacement for your roof…

view full answer...

Answer 3

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 4

We have a online diagram that will help you understand how the break away system is wired into your trailer. It is actually a simple installation. The system splices into the existing trailer wiring. The break away box will have 3 wires coming out of…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

We only have one style of "mushroom cap" for a roof vent. It is available in white with part #37202-29125, or black with part #37202-29115.

view full answer...

Answer 7

All roof vent lids are not universal, but they are similar. We do offer Camco, Valterra, VentLine, and MaxxAir roof vents; but the main thing to pay attention to is the type of hinge for your roof vent has. There are 3 point hinges, 4 point hinges,…

view full answer...

Answer 8

Hey Colin, we do have the lift arm with part #FVK8014-05 but the only replacement lids we offer are the domed ones like #FVK1020-19.

view full answer...

Answer 9

The correct replacement 63" Awning Arm Assembly for your Solera Awning is part #LC404523. I've confirmed this with Lippert, the manufacturers of Solera Awnings.

view full answer...

Answer 10

Many times the thickness of the grease seals #RG06-070 is not a factor. If this is a trailer hub there should be enough room for the seal to fit flush with seal flange.

view full answer...

Answer 11

I was able to pull up the owners manual for the Lippert Turning Point pin boxes and it is pretty simple to lock out the pin box so that you could use it with an auto sliding Demco Hijacker like you have. Basically you just install two 5/8" - 11…

view full answer...

Answer 12

Yes, it will. The Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System item #RM-766 is not only compatible with your 2024 Buick Encore GX but it is recommended to be used by Roadmaster. This a great part that makes…

view full answer...

Replacement Vent Cover with Track on Side for Raising or Lowering Lid

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching